Guidelines For Cryptic Crosswords In The Enigma

[Webmaster's Note: Taken from the June 2008 issue of The Enigma, and later updated by its authors, Hot and Trazom. -- djr]

During the years we have been editing cryptic crosswords for The Enigma, we have developed certain editorial standards — many of which are shared more-or-less universally within the United States cryptic community — as well as certain aesthetic preferences, which may be slightly more individual. We offer them here as a guide for submitting cryptics for publication in The Enigma.

Before getting into the specific dos and don'ts, we would like to correct the misconception that all Enigma cryptics must be difficult. While we are happy to publish the toughest cryptics in the US, we know that many members appreciate more straightforward puzzles. Ideally, we would like to serve the whole range of solvers.

DIAGRAM

Size
The two most common types of cryptics are a 12×12 or 13×13 bar diagram with a theme, and a 15×15 black-square diagram without. Other sizes are possible, depending on your goal; black-square diagrams can sometimes be themed, for instance, and beginning constructors may want to start with a smaller grid. Nevertheless, the standard types represent the traditional expectations of solvers.

Word Length
Words should ideally be at least four letters long, unless the puzzle is smaller than usual or has three-letter thematic entries. Never use two-letter words. (Note that this applies only to grid entries, not clue answers. A two-letter or even one-letter clue answer that will be transformed by a thematic gimmick into a full-length grid entry is perfectly fine.)

Checking
An unchecked letter, or “unch” in cryptic slang, is a letter that appears in only one word, not two. Unches should never be consecutive within a word.

In a bar diagram, approximately one-third of the letters in any word should be unches, never more; in a black-square diagram, approximately one-half, never more.

Ideally, every word should include at least one unch. The reason is that, unlike in a standard crossword, you want the solver to have to solve every clue; if a word appears automatically in the grid by virtue of the solver getting all the crossing words, then an opportunity is lost for them to marvel at your wit and ingenuity.

Symmetry
All black-square diagrams should be symmetric. Bar diagrams should be symmetric whenever possible. The definition of “possible” in this context is dependent on the constraints of the theme and the technical proficiency of the constructor.

Dictionary Nature
In general, multi-word entries should have “dictionary nature,” meaning that they could theoretically appear in a sufficiently large dictionary. Third cousin, for example, has dictionary nature; my cousin does not.

CLUES

Surface vs. cryptic reading
Every clue should have a plausible surface reading. The best clues have a surface reading so strong that it is hard to see the underlying structure of the clue.

At the same time, the cryptic reading of the clue must be accurate. In particular, the word or words connecting definition and wordplay, if any, should be readily understandable as indicating equivalence, or should point in the direction from wordplay to definition (not vice versa).

Both surface and cryptic readings of a clue must be grammatically correct.

There is a tug of war between surface and cryptic readings. Ideally, both sides should win, but in a square-dealing clue correctness trumps appearance.

Definitions
Every definition, whether of a clue answer or of any word used in the wordplay part of the clue, must be correct in both its meaning and its part of speech. 11C is the final arbiter. Words that are in NI2 or NI3 but not 11C can be clue answers, but try to avoid using them in the wordplay; also, don't use an NI-only sense of a word that appears in 11C.

Avoid definitions by example. “Puzzle” can be a definition for rebus, for example, but do not use “rebus” to define puzzle. Use “rebus, for one” or something similar.

Wordplay
In general, wordplay should offer the solver a route to the answer that is independent of the definition. So, for example, double-definition clues should involve two etymologically distinct words that happen to be spelled the same (and are listed separately in 11C), not two different senses of the same word. Similarly, charade clues should not simply break compounds down into their component parts (out + reached is a poor charade, outré + ached a good one).

Indirect anagrams (anagrams of synonyms) are not allowed. However, some constructors include abbreviations and other non-ambiguous ingredients in anagram fodder.

Any 11C abbreviation is acceptable as part of the wordplay. It is not necessary to indicate that it is an abbreviation.

Phonetic clues should be completely phonetic; partly phonetic clues are inelegant.

Wordplay indicators must work grammatically. For example, “last rites” is not an acceptable indicator for S, because a correct construction would require “last of rites”. In most cases, a compound word may be used heteronymically as part of a wordplay indicator, such as “redhead” for R.

Try to avoid clues for which two answers are possible because of symmetry. “Vampire returned key,” for instance, could be either bat or tab.

For hidden word clues, do not hide the sol in more words than necessary. For example, “Presiding officer in French airport” works for chair, but “Presiding officer in major French airport” or even “Presiding officer in a French airport” is not acceptable.

Repetition
Try to avoid repetition within a puzzle: a solution word used elsewhere as part of a clue, for example, or the same indicator used twice.

Punctuation
We allow misleading punctuation and capitalization within a clue, though we have aesthetic misgivings about the latter.

We do not end clues with a period.

We do not require an exclamation point or question mark at the end of an “& lit” clue.

We use a question mark for punny definitions.

Enumeration
For first base we use (9, 2 wds.) in bar diagrams, and (5, 4) in black-square diagrams. Likewise, far-fetched is (10, hyph.) in a bar diagram, (3-7) in a black square diagram.

Tagging
Words that are 11C or non-MW are untagged. Words that are MW but not 11C are so tagged (NI2 or NI3). The tag follows the clue, in [square brackets].

Obscure (but MW) words are acceptable as clue answers. On the other hand, if there is to be obscurity in the wordplay, it should be 11C obscurity.

Abbreviations and partial words (prefixes, suffixes, etc.) should be avoided as much as possible. If used, they should be tagged.

For archaic or regional words, including an indication such as “formerly” or “in Edinburgh” is a kindness to solvers, but is not required.

INTRODUCTION

Please use American terminology: “wordplay” rather than “subsidiary indication,” and “diagram entry” rather than “light”.

There is no reason to apologize for or identify obscure words, nor to offer a count of capitalized words.

EXCEPTIONS

Exceptions to many of these rules are negotiable, particularly for a first-time contributor, or in the case of an aesthetic disagreement rather than something that is out-and-out wrong. However, the final product must be fairly within the limits of solvers' expectations. In the case of disagreement, the decision of the editor of The Enigma is final.

A few of our constructors work within the parameters of British square-dealing setters, which differ in some respects from U.S. traditions. That is acceptable, but the puzzle will of course still be edited.

SUBMITTING

If possible, please send us the puzzle via e-mail (cryptics@puzzlers.org). You may include the text in the e-mail itself, and/or attach a .txt, .doc, .rtf or .pdf file, and/or send the diagram in a standard graphics format, and/or a spreadsheet. Or fax the diagram to Trazom at (641) 587-6675.

Solutions should be in a separate e-mail message, or a different page.

ADDITIONAL INFORMATION IN THE GUIDE

“Solving Cryptic Crosswords” by Trazom
“Guidelines for Composing Cryptic Crosswords” by Sibyl
“Some Observations on Cryptics” by Hot

This page was last updated on Friday, December 17, 2010. /webmaster